Updated 1.30.26

Saturday August 22nd 

Racer Gates open at 3pm

General Admission Gates open at 4pm

tech and registration from 4 to 7pm

Drivers meeting 730pm

General admission $20

Kids 12 and under free

Updated 1.30.26

Pour Your Own Puddle of traction compound Flashlight start Street Style Event

Were still finalizing a few details/Rules, some changes might still happen please be understanding

This event will be ran just like the streets

✅️Flashlight start

✅️Tire Crack is a Jump

✅️Cross your out

✅️1st is worse

✅️1 Burnout

For all classes- No weight outside the factory body line I.E wing, parachute ect

all racers pay a $40 registration fee + buy in for class. If you would like to enter a second class you will need to purchase a second tech card at half off $20.

registration will include 2 wrist bands 1 for the driver and 1 for a helper

DAILY DRIVER

* $140 Buy In

80/20 split

Rules:

* Vehicle Must Be Tagged, Titled, and Insured

*Must have functioning headlights, taillights, all turn signals must work, and tag light

*Pump Gas E85 only

*No AWD No 4x4

* 275/60 R15 Max Tire size DOT approved Drag RADIALS ONLY (with DOT #) - NO PBR, NO SLICKS WILL PERMIT LARGER IF LARGER FROM FACTORY (305/45R17 OR 315/40R18)

*Transbrake 2 Steps / launch control allowed

* Must have factory glass, factory body panels, and factory frame.

*Must have a functional heater.The heater must be factory or factory style meaning it must get its heat from the engine coolent system and have a heater core. the heat can't come from an electric source aka plug in heaters.

* Bolt in and Weld in K-Members are allowed. Subframe Connectors are allowed.

* Trucks may have a Lexan rear glass for roll cage only.

*Must have a Hood, it can be aftermarket Carbon Fiber, fiber glass ect as long as it utilizes hinges and a factory or factory style hood latch, hood pins can be added for added safety

* Must have FUNCTIONING windshield wipers

* must have Full Factory Interior installed, including door panels back seats, headliner and front dash. Front seats don't have to be factory

* Roll Cages are allowed for safety

* No Parachutes

*absolutely no weight outside the body line

*Meth injection is allowed in the air intake tube before the throttle body

* Single Power Adder Only, ie Turbo (twins are allowed), 1 Kit of Nitrous, 1 Procharger, etc.

* Exhaust must exit behind the front doors and have a muffler. A turbo will act as a muffler but still must go past the driver seat

*Must have a FUNCTIONING alternator

*No aftermarket wings

TRUE STREET

* $160 Buy In

* 80 /20 split

Rules:

* Vehicle Must Be Tagged, Titled, and Insured

*Must have functioning headlights, taillights, all turn signals must work, and tag light

* 275/60 R15 DRAG RADIALS, 28x10.5 PBR are OK, NO SLICKS‼️ we WILL PERMIT LARGER IF LARGER FROM FACTORY (305/45R17 OR 315/40R18)

* Must have factory front glass, and factory body panels - aftermarket bumper and aftermarket cover is ok

*No AWD/4x4 allowed

* Subframe Connectors are allowed.

* Trucks may have a Lexan rear glass for roll cage only.

* Fender exits allowed

* No Tube Chassis, but a bolt in/weld In K-Member is allowed.

* Must have 2 front seats

*no weight outside the body line

* Transbrake and 2-Steps are allowed

* Dual power adders are allowed (ie: 2 kits of Nitrous, Supercharger and 1 kit of Nitrous)

*Must have a FUNCTIONING alternator

*No AWD/4x4

SMALL TIRE

* $200 Buy In

* 80/20 Split unless racers in the final determin otherwise

Rules:

* 28 x 10.5 Non W (Max Tire Size)

* Must have Steel Roof and Quarters, unless different from the factory (ie Corvettes, Convertible)

*Must have front end

* Must be a door car

* No Wheelie Bars

*NO AWD/4X4

*no weight outside the body line

TAILGATE CLASS

$160 BUY IN

80/20 SPLIT

RWD MAX TIRE SIZE 29.5X10.5 NON W OR SMALL / AWD MAX TIRE SIZE 28X10.5 NON W OR SMALLER

NO WHEELIE BARS

NO WEIGHT OUTSIDE THE BODY LINE

AWD/4X4 ALLOWED

HARD TIRE CLASS

$100 buy in- 300 TREAD WEAR minimum 275/60/15 (UNLESS OEM LARGER FROM FACTORY) no awd 4x4

no drag radials